履带式装载机是一种高效的连续生产装卸设备。它主要用于煤矿和矿山主要巷道、铁路隧道、引水涵洞、国防工程等的大宗稀有矿石的掘进和装载。它也可以应用于露天作业中的散装物料装载。
■该机由履带行走机构驱动,推力大,挖掘覆盖面广。它实现了全断面无死区出料,不需要人工辅助清理工作面。
■采用进口液压先导控制杆系统,定位准确,挖掘范围广,物料输送速度快,性能居国内同类产品前列。
■本机可与磁选机、物料筛分机等各种辅助设备配套使用。
■其整体设计融合了德国和日本的先进技术。它配备了完整的故障检测系统和电路保护系统。连接采用世界领先的油口双密封设计,提高了油路系统的可靠性。
■人性化的领航操作系统,大大降低了操作员的劳动强度,使操作安全、轻松、舒适,适应各种复杂工况。
|
项目(Project) |
单位(Unit) |
ZWY-60/30L |
ZWY-80/30L |
ZWY-120/55L |
ZWY-150/55L |
ZWY-180/75L |
ZWY-220/110L |
||
|
技术参数(Technical specifications) |
整机重量(Weight) |
T |
6.2 | 8.2 | 14.8/16.8 | 15.8 | 18.6 | 21.6 | |
|
外形(长X宽X高)(Overall dimension(LWH)) |
毫米 |
5100X15501800 |
6100X18001800 |
650020002300 |
795021402400 |
1308823502600 |
1490024502600 |
||
|
装载能力(Loading Capacity) |
m³/h |
60 |
80 |
120 |
150 |
180 |
220 |
||
|
离地间隙(Ground clearance) |
毫米 |
220(可加高(Can be heightened)) |
260(可加高(Can be heightened)) |
300(可加高(Can be heightened)) |
360(可加高(Can be heightened)) |
≤380(可加高(Can be heightened)) |
≤400(可加高(Can be heightened)) |
||
|
额定工作压力(Nominal working pressure) |
mpa |
≤25 | ≤25 | 25/31.5 | 25/31.5 | ≤32 | ≤32 | ||
|
行走速度(Traveling Speed) |
公里/小时 |
2.1/3.8 | 2.1/3.8 | 2.15/3.8 | 2.15/3.8 | 2.15/3.8 | 2.15/3.8 | ||
|
电机总功率(Motor Power) |
千瓦 |
30 | 30/37 | 45/55 | 55 | 75 | 110 | ||
|
最大物料通过尺寸(长X宽X高)(Max.materials by size(LWH)) |
毫米 |
800600450 |
800700650 |
800780X700 |
830X800X750 |
800700800 |
830820990 |
||
|
适应巷道坡度(Applied tunnel gradient) |
o |
≤16(适应地面(Adapt to the ground)) |
≤16(适应地面(Adapt to the ground)) |
≤18(适应地面(Adapt to the ground)) |
≤18(适应地面(Adapt to the ground)) |
≤20(适应地面(Adapt to the ground)) |
≤20(适应地面(Adapt to the ground) |
||
|
适用断面(宽X高)(Applicable section(WH)) |
米 |
≥2.2X2.2 |
≥2.6X2.6 |
≥3.0X3.0 |
≥3.5X3.5 |
≥3.8X3.8 |
≥4X4 |
||
|
履带内侧宽度(The inside track width) |
毫米 |
1000(可加宽(Can be widened)) |
1000(可加宽(Can be widened)) |
1100(可加宽(Can be widened)) |
1210(可加宽(Can be widened)) |
1350(可加宽(Can be widened)) |
1400(可加宽(Can be widened)) |
||
|
刮板运输机构形式(Transport form of scraper) |
单链单驱动(Single-chain and single-drive) |
单链单驱动(Single-chain and single-drive) |
双链双驱动(Double-chain and dual-drive)单链单驱动(Single-chain and single-drive) |
双链双驱动(Double-chain and dual-drive)单链单驱动(Single-chain and single-drive) |
双链双驱动(Double-chain and dual-drive)单链单驱动(Single-chain and single-drive) |
双链双驱动(Double-chain and dual-drive)单链单驱动(Single-chain and single-drive) |
|||
|
爬坡能力(Climbing ability) |
o |
≤18(适应地面(Adapt to the ground)) |
≤18(适应地面(Adapt to the ground)) |
≤25(适应地面(Adapt to the ground)) |
≤25(适应地面(Adapt to the ground)) |
≤25(适应地面(Adapt to the ground)) |
≤25(适应地面(Adapt to the ground)) |
||
|
工作范围(The scope of work) |
挖掘宽度(Excavating Width) |
毫米 |
≥4200 | ≥4800 |
标准臂(Standard arm)5300短臂(Short arm)4800 |
标准臂(Standard arm)6300短臂(Short arm)5200 |
标准臂(Standard arm)6500短臂(Short arm)5300 |
标准臂(Standard arm)8500短臂(Short arm)7030 |
|
|
挖掘距离(Excavating Distance) |
毫米 |
≥1600 | ≥1850 | ≥2200 | ≥2850 |
标准臂(Standard arm)2800短臂(Short arm)2200 |
标准臂(Standard arm)3200短臂(Short arm)3000 |
||
|
挖掘高度(Excavating Height) |
毫米 |
≥2600 | ≥2800 |
标准臂(Standard arm)3300短臂(Short arm)2700 |
标准臂(Standard arm)3700短臂(Short arm)2700 |
标准臂(Standard arm)4400短臂(Short arm)3300 |
标准臂(Standard arm)4950短臂(Short arm)4635 |
||
|
挖掘深度(Excavating Depth) |
毫米 |
≥500 | ≥500 |
标准臂(Standard arm)700短臂(Short arm)400 |
标准臂(Standard arm)720短臂(Short arm)400 |
标准臂(Standard arm)800短臂(Short arm)700 |
标准臂(Standard arm)1120短臂(Short arm)990 |
||
|
卸载高度(Uninstall Height) |
毫米 |
1500(可变(Variable)) |
1700(可变(Variable)) |
1913(可变(Variable)) |
2000(可变(Variable)) |
2693(可变(Variable)) |
2750(可变(Variable)) |
||
|
最低装载高度(Minimum Loading Height) |
毫米 |
1350(可变(Variable)) |
1350(可变(Variable)) |
1680(可变(Variable)) |
1680(可变(Variable)) |
1700(可变(Variable)) |
1700(可变(Variable)) |
||
|
卸载距离(Uninstall Distance) |
毫米 |
1700(可变(Variable)) |
1700(可变(Variable)) |
2000(可变(Variable)) |
2000(可变(Variable)) |
3500(可变(Variable)) |
5500(可变(Variable)) |
||
|
最大回转角度(Max rotation angle) |
o |
±45 | ±50 | ±50 | ±55 | ±55 | ±55 | ||
本机支持可选安装铣挖掘机和破碎锤装置。

联系人:孙经理
手机:18653057689
电话:18653057689
邮箱:bazhaji@163.com
地址: 山东省济宁市任城区经济开发区